Time:2020-08-07
WSM-400 (PNE61-400P) (380~440VAC) DC TIG/MMA Pulse welding machine has a wider input voltage range and can automatically adapt to input voltage AC380V(-15%)~AC440V(+15%).
The parameters are shown in the table below:
Model |
PNE61-400P (380~440V) |
Input voltage |
380V (-15%)~440V (+15%) |
Rated output capacity |
400A/36V |
Rated no-load voltage |
76V (U1 =380V) 84V (U1 =415V) 88V (U1 =440V) |
Rated no-load current |
<1A |
Power factor |
COSΦ≥0.85 |
Efficiency |
η≥85% |
Insulation grade |
F |
Case protection grade |
IP23S |
Duty cycle |
60%(400/36V) |
Output current adjusting range (TIG) |
5A~400A |
Output current adjusting range (MMA) |
20A~400A |
Arc force range |
0~100 A/ms |
Arc striking adjusting range |
15A~410A |
Arc striking time |
0.01 s~1s |
Arc length adjusting range |
40V~80V |
TIG Mode |
11 |
Initial current range |
5A~410A |
Maintain current |
5A~410A |
Pre-flow time |
0.1s~13s |
Post-flow time |
0.1s~50s |
Spot time |
0.01s~9.99s |
Slope-up time |
0.1s~99.9s |
Slope-down time |
0.1s~99.9s |
Spot current |
5A~410A |
Base current |
5A~410A |
Peak current |
5A~410A |
Pulse frequency |
0.1 Hz~500Hz |
Pulse ratio range |
1~99% |
Dimensions (W×H×L) |
300×530×560 |
Net weight |
33kg |